Driveshaft Shop Aluminum Driveshaft With Direct Fit Rear Flange Fits Pontiac GTO

2004 For PONTIAC GTO / Monaro

GTOSH2 1000HP 1-Piece Aluminum Driveshaft

Now with a direct fit rear flange, eliminates the billet aluminum plate !!!!!

2004 GTO ONLY

The 3.5? aluminum single piece driveshaft is a direct bolt-on system. Most driveshafts available for the GTO platform require the rear flange to removed from the diff, the problem with this is that the differential is a crush collar type, and the preload on the nut sets the pinion depth to make sure the rear gears have the proper engagement. What we have done is made a 7075-T6 aluminum 1350 u-joint flange that will bolt directly to the 3 finger flange on the rear, eliminating the adapter plate. This eliminates the need to have a professional set the pinion lash on the differential. Just unbolt the factory 2 piece shaft, install the 1-piece shaft with the included hardware and go. The only necessary modification is the tip of the rear seatbelt bolt that protrudes into the driveshaft tunnel must be ground down to provide adequate clearance for the driveshaft. Changing the shaft in this car is perhaps one of the most noticeable performance enhancements you can do as the car will have better throttle response and feel smoother overall. Not only is it lighter but the hanger bearing on the factory driveshaft moves up and down violently when the car is being driven hard. This action is not only dangerous but robs the drive train of power. Capable of 997lb of torque based on shock factor of 3.5.

Rated to 1000HP and 155MPH Max Top Speed

Features the billet aluminum direct fit rear flange, no plate required.

Warranty: 1 year| Special Notes: fits the 2004 GTO ONLY 6-Speed Manual and Automatic

Rated to 1000HP and 155MPH Max Top Speed

The only necessary modification is the tip of the rear seatbelt bolt that protrudes into the driveshaft tunnel must be ground down to provide adequate clearance for the driveshaft.

For 30+ years The Driveshaft Shop has been creating and manufacturing innovative drivetrain solutions for street and racing use. Driveshaft Shop axles and driveshafts have been integral in helping racers set, and reset world records in categories of Front Wheel Drive, Rear Wheel Drive, and All Wheel Drive racing. We are a full CNC machine shop and manufacturing facility located in Salisbury, North Carolina, USA. Each driveshaft we produce is dynamically balanced at over 9000 RPMs to ensure unbeatable reliability. We offer the highest quality CV axles and driveshafts made from Steel, Aluminum, and Carbon Fiber for Sport Compact, European, and Modern Muscle car applications, not to mention our capability to build custom for just about anything. “We Specialize in the Impossible”